复合材料失效判据有效性验证方法研究

为系统地验证复合材料失效判据计算精度和有效性范围,给出了4种材料体系、6种铺层形式的层合板在单轴、双轴载荷下的失效试验数据,用以评估复合材料失效判据在单向层合板失效包线、多向层合板初始失效包线、多向层合板最终失效包线、层合板变形及层合板的破坏特性等五个方面的预测能力。并根据验证方法和有效性评估策略对失效判据计算精度进行量化考核,给出了失效判据在五个层面上的计算精度。     

多层网络级联失效的预防和恢复策略概述

现实生活中,与国计民生密切相关的基础设施网络大多不是独立存在的,而是彼此之间相互联系或依赖的,于是用于研究这些系统的多层网络模型随之产生.多层网络中的节点在失效或者遭受攻击后会因"层内"和"层间"的相互作用而产生级联效应,从而使得失效能够在网络层内和层间反复传播并使得失效规模逐步放大.因此,多层网络比单个网络更加脆弱.多层网络级联失效产生的影响和损失往往是非常巨大的,所以对多层网络级联失效的预防和恢复的研究具有重大意义.就多层网络级联失效的预防而言,主要包含故障检测,保护重要节点,改变网络耦合机制和节点备份等策略.就多层网络发生级联失效后的恢复策略而言,主要包含共同边界节点恢复、空闲连边恢复、加边恢复、重要节点优先恢复、更改拓扑结构、局域攻击修复、自适应边修复等策略.     

Wall shear stress modified by bubbles in a horizontal channel flow of silicone oil in the transition region

We performed laboratory experiments on bubbly channel flows using silicone oil, which has a low surface tension and clean interface to bubbles, as a test fluid to evaluate the wall shear stress modification for different regimes of bubble migration status. The channel Reynolds numbers of the flow ranged from 1000 to 5000, covering laminar, transition and turbulent flow regimes. The bubble deformation and swarms were classified as packing, film, foam, dispersed, and stretched states based on visualization of bubbles as a bulk void fraction changed. In the dispersed and film states, the wall shear stress reduced by 9% from that in the single-phase condition; by contrast, the wall shear stress increased in the stretched, packing, and foam states. We carried out statistical analysis of the time-series of the wall shear stress in the transition and turbulent-flow regimes. Variations of the PDF of the shear stress and the higher order moments in the statistic indicated that the injection of bubbles generated pseudo-turbulence in the transition regime and suppressed drag-inducing events in the turbulent regime. Bubble images and measurements of shear stress revealed a correlated wave with a time lag, for which we discuss associated to the bubble dynamics and effective viscosity of the bubble mixture in wall proximity.     

Concise synthesis of dopexamine dihydrochloride via benzyl protecting protocol

Benzyl protecting protocol was first employed in two routes for the concise synthesis of dopexamine dihydrochloride.This protecting group could be cleanly removed under mild condition and no unacceptable ion was brought to the final product.The total yield of route I was 43.8% from phenylacetic acid,while it was 54.1% of route II from 2-(3,4-bis(benzyloxy)phenyl)acetic acid.The titration purity of the final product was more than 99.5%,while any single or total impurities met the known standard of the drug by HPLC analysis.The measured residual palladium met an acceptable limit(<1 ppm) as an API for injection.     

Facile non‐lithographic route to highly aligned silica nanopatterns using unidirectionally aligned polystyrene‐block‐polydimethylsiloxane films

Thin films (monolayer and bilayer) of cylinder forming polystyrene‐block‐polydimethylsiloxane (PS‐b‐PDMS) were shear aligned by the swelling and deswelling of a crosslinked PDMS pad that was physically adhered to the film during solvent vapor annealing. The nanostructures formed by self‐assembly were exposed to ultraviolet‐ozone to partially oxidize the PDMS, followed by calcination in air at 500 °C. In this process, the PS segments were fully decomposed, while the PDMS yielded silica nanostructures. The highly aligned PDMS cylinders were thus deposited as silica nanolines on the silicon substrate. Using a bilayer film, the center‐to‐center distance of these features were effectively halved from 38 to 19 nm. Similarly, by sequential shear‐alignment of two distinct layers, a rhombic array of silica nanolines was fabricated. This methodology provides a facile route to fabricating complex topographically patterned nanostructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1058–1064     

一类改进最大熵方法的可调参数分析

在结构可靠性分析中,引入含可调参数的转换函数能对传统的最大熵方法进行改进,获得更高的失效概率预测精度。但是,此可调参数的最佳取值很难确定。针对这一问题,引入概率守恒方程,从功能函数转换前后所得概率密度函数出发,建立其最大熵值的变化关系,给出转换前后最大熵值之差的理论形式。通过对三种典型单调非线性转换函数开展算例研究,发现功能函数转换前后的最大熵值之差与转换函数的最佳可调参数值有关。改变可调参数值驱使最大熵值之差变化的同时,改进最大熵方法能遍历到更好的失效概率估计值。     

A Dynamic Anomaly Detection Approach Based on Permutation Entropy for Predicting Aging-Related Failures

Software aging is a phenomenon referring to the performance degradation of a long-running software system. This phenomenon is an accumulative process during execution, which will gradually lead the system from a normal state to a failure-prone state. It is a crucial challenge for system reliability to predict the Aging-Related Failures (ARFs) accurately. In this paper, permutation entropy (PE) is modified to Multidimensional Multi-scale Permutation Entropy (MMPE) as a novel aging indicator to detect performance anomalies, since MMPE is sensitive to dynamic state changes. An experiment is set on the distributed database system Voldemort, and MMPE is calculated based on the collected performance metrics during execution. Finally, based on MMPE, a failure prediction model using the machine learning method to reveal the anomalies is presented, which can predict failures with high accuracy.     

Fatigue Behavior of Composite Sandwich Panels Under Three Point Bending Load

In this paper, the bending fatigue tests of honeycomb sandwich panels are carried out by using an improved three-point bending test fixture, and the S-N curves at different stress ratios are obtained. Through the records of fatigue damage in the experiment, the failure mode of the honeycomb sandwich panels and the source of fatigue damage are determined. At the same time, through the calculation of the shear stress distribution on the honeycomb wall, the reasons for the difference in the failure morphology of the L-direction and W-direction sandwich panels are clarified. Besides, a life prediction method is proposed and its effectiveness in predicting the fatigue life of sandwich panels has been verified.     

简支及悬臂箱梁在角隅轴向荷载作用下的翼板纵向应力

基于能量变分原理，拟定轴向荷载作用下箱梁的纵向位移函数，得到关于翼板剪切变形引起的位移差函数的基本微分方程，继而推导出箱梁翼板纵向应力表达式，并首次得出角隅轴向荷载作用下翼板出现应力不均匀分布的荷载及边界条件。通过对一模型箱梁进行计算，并与通用有限元软件ANSYS壳单元计算结果进行比较，验证了该方法和所推导公式的正确性。研究结果表明，当作用于简支箱梁截面角隅处的轴向荷载（合力无偏心）为集中或分布荷载时，翼板不产生纵向应力不均匀现象；当作用于悬臂箱梁截面角隅处的轴向荷载（合力无偏心）为集中荷载时，翼板不产生纵向应力不均匀现象，而当荷载轴向分布时，翼板将产生纵向应力不均匀现象。实际工程中，横力弯曲使悬臂箱梁产生剪力滞效应，这种效应会与轴向分布荷载产生的效应叠加，设计时对此应予以充分考虑。     

Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606